西門子35mm模塊屏蔽套件

時間：2018-07-12作者：湖南迪碩自動化設備有限公司瀏覽：7

概述

• The CPU for applications with medium to high requirements for program/data storage in the S7-1500 controller product range
• Can be used for failsafe functions up to SIL 3 according to IEC 61508 and up to PLe according to ISO 13849.
• Medium to high processing speed for binary and floating-point arithmetic
• Used as central controller in production lines with central and distributed I/O
• Supports PROFIsafe in centralized and distributed configurations
• PROFINET IO IRT interface with 2-port switch
• Additional PROFINET interface with separate IP address
• PROFINET IO Controller for operating distributed I/O on PROFINET
• PROFINET I-Device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET IO Controller
• Isochronous mode
• Integrated Motion Control functionalities for controlling speed-controlled and positioning axes, support for external encoders
• Integrated web server with the option of creating user-defined web pages

Note

SIMATIC Memory Card required for operation of the CPU.

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

應用

The CPU 1515F-2 PN is the CPU with a medium program and data memory for standard and fail-safe applications that also contain distributed automation structures alongside central I/O. It can be used as a PROFINET IO controller or as distributed intelligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as a 2-port switch so that a linear topology can be set up in the system. The additional integrated PROFINET interface with separate IP address can be used, for example, for network separation. In addition, the CPU offers comprehensive control functionalities as well as the ability to connect drives via standardized PLC-open blocks.

設計

The CPU 1515F-2 PN features:

• A powerful processor:
  The CPU achieves command execution times as low as 30 ns per binary instruction.
• A large work memory:
  750 KB for program, 3 MB for data
• SIMATIC Memory Cards as load memory;
  permit additional functions such as datalog and archives
• Flexible expansion capability:
  single-tier configuration with max. 32 modules (CPU + 31 modules)
• Screen with functions for
  • displaying overview information such as IP address of the integrated interface, station name, plant designation, location identifier, etc.
  • displaying safety mode, overall signature and date of the last download with signature change
  • displaying diagnostic information
  • displaying module information
  • showing display settings
  • displaying a user-definable logo
  • setting IP addresses
  • setting date and time
  • selecting the operating mode
  • resetting the CPU to factory settings
  • disabling/enabling of display
  • Enabling of protection levels.
• PROFINET IO IRT interface for connecting distributed I/O via PROFINET
• PROFINET interface for network separation

功能

• Performance
  • Faster command processing, depending on the CPU type, language extensions and new data types
  • Even shorter CPU response times due to considerably faster backplane bus
  • Powerful network connection:
    each CPU is equipped with PROFINET IO IRT (2-port switch) as a standard interface.
• Integrated technology
  • Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
  • Support of speed-controlled and positioning axes as well as external encoders
  • Trace functions for all CPU tags, both for diagnostics in real time as well as for sporadic error detection
  • Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
• Security Integrated
  • Password-based know-how protection against unauthorized read-out and modification of program blocks
  • Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted into the CPU.
  • 4-level authorization concept:
    Communication to the HMI devices can also be restricted.
  • Manipulation protection:
    The controller recognizes changed or unauthorized transmissions of the engineering data.
• Design and handling
  • Display for showing overview information:
    e.g. station name, plant identifier, location designation, etc., diagnostic information, module information, display settings.
  • Possible operator control options on the display:
    Set addresses of the CPU or connected Ethernet communications processors, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.
• Integrated system diagnostics
  • System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, HMI devices and web server, even for messages from the drives. It is updated even if the CPU is in STOP mode.
  • Integrated into the firmware of the CPU, no special configuration is required
• SIMATIC Memory Card (required for operation of the CPU)
  • Used as a plug-in load memory or for updating the firmware.
  • Also for storing additional documents or csv files (for recipes and archives)
  • Creation of data blocks for storage/reading of data via SFCs of the user program
• Datalog (archives) and recipes
  • Storage of csv files for recipes and archives on the SIMATIC Memory Card;
    easy access to plant-relevant operating data using Office tools or via a Web server
  • Easy access to machine configuration data by means of a Web browser or SD card reader (two-way data exchange from and to the controller)
• Programming of the standard program section
  • Programming with STEP 7 Professional, V13 and higher
  • Migration tool for migrating from SIMATIC S7-300/S7-400 to S7-1500, converts the standard program code largely automatically. Non-convertible code is logged and can be manually adapted.
  • S7-1200 basic programs can be transferred to the S7-1500 by means of copy&paste.
• Programming of the fail-safe program section
  • Programming of the safety-related program section with the "STEP 7 Safety Advanced" option package.

湖南迪碩自動化設備有限公司專注于西門子代理商,長期回收西門子模塊,中國西門子代理商等

• 詞條

  詞條說明

• 西門子DP總線6XV18303EH10

  ???? SIEMENS?? 西門子代理商 ??? 上海非俗工控自動化設備有限公司 ?聯系人????????? ： 瞿章明? （銷售經理） ?24小時服務熱線? ：132 1743

• 西門子DP總線接頭6ES7972-0BA12-0XA0

  本公司常年備貨，以誠信為公司的經營理念，以品質來**客戶的認可，假一罰十，歡迎廣大客戶來電洽談： 上海非俗工控自動化設備有限公司（西門子分銷商） 聯系人;瞿章明??? ：132 1743 0013? 商務QQ?????????? ：275 013 0146

• 西門子S7-300RS485總線插頭

  我公司是一家專業銷售，維修西門子工業自動化產品，團隊成立十幾年，憑借高**的技術和專業的服務！一致得到客戶的**！歡迎來電質詢高品質西門子產品！ 歡迎來電質詢高品質西門子自動化產品； 聯系人??????????? ： 瞿章明（銷售工程師） 聯系電話：???&nb

• 西門子RS485插頭

  我公司是一家專業銷售，維修西門子工業自動化產品，團隊成立幾十年，憑借高**的技術和專業的服務！一致得到客戶的**！歡迎來電質詢高品質西門子產品！ 聯系人??????????? ：瞿章明（銷售工程師） 手機???????&n