無線測溫產品在馬來西亞某配電項目的應用

    摘要:配電系統是由多種配電設備和配電設施所組成的變換電壓和直接向終端用戶分配電能的一個電力網絡系統。由于配電系統作為電力系統的一個環節直接面向終端用戶,它的完善與否直接關系著廣大用戶的用電可靠性和用電質量,因而在電力系統中具有重要的地位。因此,為避免因溫度高,導致設備老化,設備燒壞,供電中斷,一次設備起*炸等嚴重事故,對各電氣節點進行長期的溫度監測能避免因嚴重故障,造成用戶的人身傷害及經濟損失。

    Abstract: The power distribution system is a power network system that is composed of a variety of power distribution equipment and power distribution facilities to transform voltage and directly distribute electrical energy to end users. As a part of the power system, the power distribution system directly faces end users, and its perfection directly affects the reliability and quality of power consumption of the majority of users, so it has an important position in the power system. Therefore, in order to avoid serious accidents such as equipment aging, equipment burnout, power supply interruption, fire and explosion of equipment due to high temperature, long-term temperature monitoring of each electrical node can avoid serious failures that may cause personal injury and economic loss to users.

    關鍵字:無線測溫傳感器,無線測溫系統,433Mhz無線測溫

    Keywords: Wireless temperature sensor, wireless temperature monitoring system, 433Mhz wireless temperature sensor

    1.項目概述 Project Overview

    本項目為馬來西亞某配電室的應用,應用在33kV的配電盤中,需要配置無線測溫產品,實現安全溫度監測。銅排尺寸為10mm×130mm,選擇我司ATE400型CT感應取電式傳感器,并且采用ATC450收發器來連接顯示裝置。通過RS485通訊數據傳輸?shù)娇蛻羝脚_(tái)進行實時監控,可防止過熱故障,影響設備正常運行,避免安全隱患。出于安全和經濟效益考慮,建議在配電室各電氣節點進行溫度實時監測。

    This project is an application in a distribution room in Malaysia. It is used in a 33kV switchboard and needs to be equipped with wireless temperature measurement products to achieve safe temperature monitoring. The size of the copper bar is 10mm×130mm. Choose our ATE400 CT powered temperature sensor, and use ATC450 transceiver to connect to the display device. The RS485 communication data is transmitted to the customer platform for real-time monitoring, which can effectively prevent overheating failures, affecting the normal operation of the equipment, and avoiding potential safety hazards. For the sake of safety and economic benefits, it is recommended to conduct real-time temperature monitoring at each electrical node in the power distribution room.

    2.無線測溫產品介紹

    Introduction of Wireless Temperature Measurement Product

    安科瑞在線測溫裝置適用于高低壓開關內線纜街頭,斷路器觸頭,高壓線纜中間頭,低壓大電流等設備的溫度檢測,防止在運行過程中因氧化,松動等因素造成接點接觸電阻過大而發熱成為安全隱患,及時,持續及準確反映設備運行狀態,提供設備安全性。

    Acrel on-line temperature measurement device is suitable for the temperature detection of high and low voltage switches, circuit breaker contacts, high voltage cable middle heads, low voltage and high current equipment, to prevent contact caused by oxidation, loosening and other factors during operation Excessive contact resistance and heat generation become a safety hazard, timely, continuous and accurate reflection of equipment operating status, and equipment safety.

    3.無線測溫系統特點 Features of Wireless Temperature Monitoring System

    (1)無線測溫模塊安全可靠、安裝維護簡單,適合對中開關高電壓、大電流接點處進行溫度監測,被測設備的結構不需要變動。

    (2)整個無線測溫系統可以通過無線方式通訊,信號傳輸方便。

    (3)無線測溫系統抗干擾能力強,對脈沖干擾、瞬變干擾、靜電輻射、電磁場輻射等的抗干擾能力達到國家四級標準,同時設備運行不影響中壓開關的分、合閘操作以及保護裝置的動作。

    (4)應用在工業(煤礦、鋼鐵、石油、化工)、電廠、學校、醫院、**建設、交通設施(機場、火車站)、商業建筑、會展中心、光伏發電、新能源等領域。

    (1) The wireless temperature measurement module is safe and reliable, and easy to install and maintain. It is suitable for temperature monitoring at the high voltage and high current contacts of the middle switch. The structure of the device under test does not need to be changed.

    (2) The entire wireless temperature measurement system can communicate wirelessly, and the ** transmission is convenient.

    (3) The wireless temperature measurement system has strong anti-interference ability, and its anti-interference ability against pulse interference, fast transient interference, electrostatic radiation, electromagnetic field radiation, etc. has reached the national four-level standard, and the operation of the equipment does not affect the opening and closing of the medium voltage switch Operation and protection device actions.

    (4) Application in industry (coal, steel, petroleum, chemical), power plants, schools, hospitals, municipal construction, transportation facilities (airports, railway stations), commercial buildings, convention and exhibition centers, photovoltaic power generation, new energy and other fields.

    4.無線測溫解決方案 Wireless Temperature Monitoring Solution

    4.1 測溫傳感器 Wireless temperature sensor

    4.1.1 CT感應取電無線測溫傳感器 Wireless temperature sensor by CT sensing

    ATE400

    ·Small size;

    ·Wireless transmit;

    ·Wireless transmission distance, 150 meters;

    ·Fase sampling frequency,15s;

    ·CT-powered, more than starting current;

    ·Widely temperature measuring range, -40℃~125℃.

    4.1.2電池供電型無線測溫傳感器 Wireless temperature sensor powered by battery

    1) ATE200

    ·Wireless transmit;

    ·Wireless transmission distance, 150m;

    ·Fase sampling frequency, 25s;

    ·Battery -powered, more than 5 years;

    ·Widely temperature measuring range, -40℃~125℃.

    ATE100

    ·Wireless transmit;

    ·Wireless transmission distance, 150m;

    ·Fase sampling frequency, 25s;

    ·Battery -powered, more than 5 years;

    ·Widely temperature measuring range, -40℃~125℃.

    ATE100M

    ·Wireless transmit;

    ·Wireless transmission distance, 150m;

    ·Fase sampling frequency, 25s;

    ·Battery -powered, more than 5 years;

    ·Widely temperature measuring range, -40℃~125℃.

    4.2 采集/顯示終端 Receiver/Display Unit

    4.2.1 接收單元 Receiver

    1)ATC600-C

    ·Wireless transceiver;

    ·Maximum measuring 240 points;

    ·1 RS485 serial communication, Modbus-RTU;

    ·2 alarm relays;

    ·Power supply adapt with AC/DC220V, AC/DC110V.

    2)ATC450-C

    ·Wireless transceiver;

    ·Maximum measuring 60 points;

    ·1 RS485 serial communication, Modbus-RTU;

    ·Power supply adapt with DC24V

    4.2.2 顯示單元 Display Unit

    1) ARTM-Pn

    ·Wireless temperature measurement, maximum measuring 60 points;

    ·U, I, P, Q, f, Ep, Eq measurement;

    ·4 digital inputs;

    ·2 alarm relays;

    ·LCD display;

    ·Power supply adapt with AC220V, DC220V, DC110V, AC110V;

    ·1 RS485 serial communication, Modbus-RTU.

    5.結構圖 Typical Connection

    6.應用場景 Application

    7.現場圖片 Photos on Site

    參考文獻Bibliography

    1.Solutions For Enterprise Micro-grid System 2020.02


    江蘇安科瑞電器制造有限公司專注于電瓶車充電樁,多回路電能表,多回路預付費電表,多用戶電能計量表,有源電力濾波器,直流列頭柜等

  • 詞條

    詞條說明

  • 多回路電能表,多回路電能表要怎么選?

    多回路電能表(nndsaf.cn.b2b168.com)44kW的電機有兩個選表方案:1、選擇三相四線直通表,電流規格選20(80)A,電壓規格為3×220/380V,如果說型號,可以選寧波三星的電子式電能表DTS188,也可選浙江華立的DTS51,等等。這個方案造價*,但是*因過負荷燒表。2、選擇三相四線經互感器表計,電能表電流規格為1.5(6)A,電壓規格為3×220/380V,另外配三個

  • 醫用隔離電源系統在南陽醫學高等??茖W(xué)校附屬醫院中的應用

    摘要: 介紹該南陽醫學高等??茖W(xué)校附屬醫院采用安科瑞醫用隔離電源系統,使用配電柜安裝方式,從而實現將TN系統轉化為IT系統,以及系統絕緣情況監測。0 概述本建設項目為南陽醫學高等專科學校附屬醫院綜合樓病房(含兒科),建筑面積:83497平方米,其中:地上建筑面積70596平方米,地下建筑面積12901平方米,為三級甲等醫院。本項目由3層(裙房)醫技及22層病房樓組成(皆有二層地下室)。建筑層數:地

  • 蒙牛乳業(當陽)有限公司低壓系統改造電力監控系統的設計與應用

    摘要:本文介紹蒙牛乳業(當陽)有限公司低壓系統改造電力監控系統,采用智能電力儀表、采集配電現場的各種電參量和開關信號。系統采用現場就地組網的方式,組網后遠傳至后臺,通過Acrel-2000型電力監控系統實現配電室配電回路用電的實時監控和管理。關鍵詞:蒙牛;智能電力儀表;Acrel-2000;電力監控系統; 0?概述????隨著社會經濟發展、生產自動

  • 淺談數據中心新型配電模式下的配電設計方案

    1.行業趨勢及用戶需求分析? ? ? ?傳統的列頭柜配電模式在數據工程建設和運行維護中存在較多的問題,包括供電線纜、橋架金屬消耗量大、施工難度大、占用機房空間、使用壽命短、系統差、維護檢修難度大、影響氣流組織等等,而小母線的應用,從某些程度上為用戶避免了傳統列頭柜配電模式的弊端,在新的數據建設形勢下,有著巨大的優勢,展開如下:1)安裝方便、可靠性高 

聯系方式 聯系我時,請告知來自八方資源網!

公司名: 江蘇安科瑞電器制造有限公司

聯系人: 吳雅芳

電 話:

手 機: 18706162527

微 信: 18706162527

地 址: 江蘇無錫江陰市江蘇省江陰市南閘街道東盟路5號

郵 編:

網 址: nndsaf.cn.b2b168.com

八方資源網提醒您:
1、本信息由八方資源網用戶發布,八方資源網不介入任何交易過程,請自行甄別其真實性及合法性;
2、跟進信息之前,請仔細核驗對方資質,所有預付定金或付款至個人賬戶的行為,均存在詐騙風險,請?zhí)岣呔瑁?
    聯系方式

公司名: 江蘇安科瑞電器制造有限公司

聯系人: 吳雅芳

手 機: 18706162527

電 話:

地 址: 江蘇無錫江陰市江蘇省江陰市南閘街道東盟路5號

郵 編:

網 址: nndsaf.cn.b2b168.com

    相關企業
    商家產品系列
  • 產品推薦
  • 資訊推薦
關于八方 | 八方幣 | 招商合作 | 網站地圖 | 免費注冊 | 一元廣告 | 友情鏈接 | 聯系我們 | 八方業務| 匯款方式 | 商務洽談室 | 投訴舉報
粵ICP備10089450號-8 - 經營許可證編號:粵B2-20130562 軟件企業認定:深R-2013-2017 軟件產品登記:深DGY-2013-3594
著作權登記:2013SR134025
Copyright ? 2004 - 2025 b2b168.com All Rights Reserved